The Most Compact 5GNR MIMO Antenna with WiFi and GNSS Capabilities on the Market
2J Antennas is pleased to introduce the next-generation combination antenna: “The Condor Series” 5GNR MIMO 2.4/5.0 GHz ISM MIMO and GNSS Adhesive Mount Antenna (2J4A86PCFa). This antenna is the most compact antenna on the market and the most versatile in this product group.
Worldwide solution
It offers a 5-in-1 cable selection in the same enclosure covering a wide bandwidth (617 – 5925 MHz). The 2J4A86PCFa supports 5GNR, 4G LTE, FirstNet, CBRS, LPWA, CAT-X, CAT-Mx, CAT-NBx, NB-IoT, 3G, 2G, WiFi, BT, ZigBee, ISM, GPS, QZSS, Galileo and GLONASS standards making it the most reliable antenna on the market for the following suggested applications:
Cables 1 and 2: 5GNR
Cables 1 and 2 are designed for 5GNR devices that operate within worldwide 4G Bands including 3G and 2G within the 617 – 5925 MHz frequencies. The 5GNR technology introduces millimeter-wave (mmWave) frequency for new generation LTE bands making it an ideal solution for MIMO technology. Both cables are designed with omni-directional radiation pattern and linear polarization for maximum 360-degree signal strength.
Cables 3: 2.4/5.0 GHz
Cables 3 and 4 are dedicated to wireless-enabled device solutions operating within WiFi, BT, ZigBee and ISM standards. Both cables are designed with omni-directional radiation pattern for maximum radiation efficiencies delivering unmatched performance and making it the ideal solution for high-capacity network communications and HD video streaming.
Cables 5: GNSS
Cable 5 is designed for precision navigational applications that operate within BeiDou, GPS, QZSS, Galileo and GLONASS standards. Designed with a hemispherical radiation pattern and right-hand circular polarization allows cable 5 to radiate on all planes and maximize connectivity by avoiding conflict with propagating signals, penetrating obstructions, reducing dead spots, boosting throughput and improving resistance to signal degradation caused by inclement weather conditions. Cable 5 can maintain an active gain of 28 dB @ 2.7 V and a noise figure parameter of 1.5. Cable 5 is designed with electrostatic discharge (ESD) protection for up to 2KV and a SAW pre-filter blocking inadequate frequencies (within 1561-1602 MHz) from passing from the antenna to the receiver.
All our products have been tested by our expert engineers and measured in our certified CTIA 3D Anechoic Chamber. Please contact our experienced team for assistance with antenna selection and recommendations.
Installation / Environmental
With a compact bar shape housing (58.7 x 157.6 x 14.4 mm) and a separate double-adhesive pad, the 2J4A86PCFa can be securely and safely installed on any type of surfaces such as windshields, dashboards, plastics, etc.
Manufactured with high-quality ABS UV stable material, the IP67/ IP69k compliant design provides maximum protection in extreme outdoor applications while maintaining exceptional performance. Cable 1-4 come with standard SMA-Male connector with a 300 cm long LL195 (Low Loss coaxial) cable and cable 5 comes with standard SMA-Male connector and 300 cm long LL190 (Low Loss coaxial) cable. Both cables are a popular choice for good return loss, insertion loss and amplitude stability. We offer a wide range of alternative connectors and cables for any customization needs and our highly skilled team is available to guide our customers through any special requirements. 2J Antennas supports the health of our environment and manufactures all our products without hazardous materials making us fully REACH and RoHS compliant.
Technologies 5G, 4G, 3G and 2G
Standards 5GNR/4GLTE/FirstNet/CBRS/LPWA/CAT-X/CAT-Mx/CAT-NBx/NB-IoT/3G/2G
Frequency 617-960, 1427-2690, 3300-5000, 5150-5925
Return Loss (dB) ~-9.1, ~-7.0, ~-6.9, ~-6.7
VSWR ~2.7:1, ~2.9:1, ~2.9:1, ~3.4:1
Efficiency (%) ~45.8, ~39.6, ~32.2, ~14.4
Peak Gain (dBi) ~1.2, ~1.3, ~0.6, ~-2.7
Impedance (Ohm) 50
Polarisation Linear
Radiation Pattern Omni-Directional
Max. Input Power (W) 35
Technologies 5G, 4G, 3G and 2G
Standards 5GNR/4GLTE/FirstNet/CBRS/LPWA/CAT-X/CAT-Mx/CAT-NBx/NB-IoT/3G/2G
Frequency 617-960, 1427-2690, 3300-5000, 5150-5925
Return Loss (dB) ~-7.8, ~-8.8, ~-5.1, ~-4.3
VSWR ~2.7:1, ~2.7:1, ~3.8:1, ~4.2:1
Efficiency (%) ~43.0, ~40.0, ~25.1, ~22.7
Peak Gain (dBi) ~0.4, ~1.7, ~-0.1, ~-1.4
Impedance (Ohm) 50
Polarisation Linear
Radiation Pattern Omni-Directional
Max. Input Power (W) 35
Standards WiFi, BT, ZigBee, ISM
Frequency 2410-2490, 4920-5925
VSWR ~2.4:1, ~2.0:1
Efficiency (%) ~24.3, ~47.2
Peak Gain (dBi) ~-1.5, ~3.8
Impedance (Ohm) 50
Polarisation Linear
Max. Input Power (W) 25
Efficiency (%) ~39.0, ~55.9
Peak Gain (dBi) ~0.8, ~4.9
Impedance (Ohm) 50
Polarisation Linear
Max. Input Power (W) 25
Standards WiFi, BT, ZigBee, ISM
Frequency 2410-2490, 4920-5925
VSWR ~1.7:1, ~1.4:1
Impedance (Ohm) 50
Polarisation RHCP
Active Gain (dB) 28 @ 2.7 V
Saw Filter Type Pre-Filter
Voltage (V) 1.5 – 3.6
Noise Figure (dB) 1.5 Typ
Current Consumption (mA) 9 Typ
Power Consumption (mW) 24.3 Typ
ESD Protection (kV) 2
Standards GPS/GLONASS/BeiDou/QZSS/Galileo
Frequency 1561.098, 1575.42, 1598-1610
VSWR <=1.4:1
Reviews
There are no reviews yet.